hong kong location country. Hong Kong is the capital of which country? Judicial power and law enforcement

Is an artificial Christmas tree a sacrilege? Not at all. On the contrary, in terms of conservation surrounding nature, buy an artificial Christmas tree for the new year - a noble act. And by the way, you don’t have to buy a Christmas tree, you can make an unusual Christmas tree with your own hands.

How to make an unusual Christmas tree with your own hands

In almost all variants of how to make an unusual Christmas tree, the cardboard base is used, as in the previous master classes, all the unusualness of today's Christmas trees lies in decorative materials.

To begin with, a selection of four unusual Christmas trees.

How to make these beautiful Christmas trees see below.

The first Christmas tree is made from spoons.

To make this Christmas tree you will need: a package of plastic spoons, glue and paint. The course of work is quite simple: we cut off the handles from the spoons, lay them on a newspaper or unnecessary paper and cover with spray paint (by the way, you can also spray paint on the cardboard base). As soon as the paint dries, we begin to glue the spoons, as shown in photos 6,7,8.

The next Christmas tree is made of Christmas decorations.

In order to make a Christmas tree from toys, you will need: the actual packaging of Christmas tree decorations, glue, a base and Christmas tree tinsel. We remove the rivets from the toys, glue the Christmas balls to the base, then glue the tinsel into the space between the balls to hide the gaps. We love the result!

And the remaining two Christmas trees: one is made of tinsel and sweets, and the other is made only of tinsel.

And you can make a Christmas tree from the leaves of trees. Paint them with some spray paint and glue everything to the same base. It turns out a rather unusual, beautiful Christmas tree.

Other original ways to make a Christmas tree with your own hands include foam balls, feathers and sparkles.

With Christmas trees made of feathers or foam balls, everything is clear - just glue them to the base. But a few words should be said about how to make a “shiny” Christmas tree: before applying sparkles, apply a mixture of shaving gel and glue (1: 1) to the base, let it dry a little and sprinkle with sparkles. Agree, such Christmas trees look very original.

Another option that deserves attention is a Christmas tree made of cones or twigs. You can make a Christmas tree from whole cones.

And you can, so to speak, “disassemble” the bump and glue its scales, as shown in the photo.

An unusual Christmas tree made of cones is ready.

No less beautiful and original Christmas tree can be made from seeds: sunflower or pumpkin.

Surely it's not a secret for anyone that in our time you can buy artificial fruits, and from them, as you can see in the photo below, you can make an unusual Christmas tree. Pre-paint the base in a suitable color, allow the paint to dry. Pour fruits over the dried base, decorate the bottom with beautiful twigs, a bow on top and you can surprise your loved ones with an original Christmas tree.

By the way, in order to make a New Year's topiary in the form of a Christmas tree with your own hands, a cardboard cone will also fit. In general, we are watching a mini master class on creating a New Year's topiary. A cone made of thick paper or cardboard must be glued to a stick (by the way, if you ate rolls the day before, you can use a stick from them) wrapped with twine or a beautiful thread. We glue the resulting design to a glass, fill it with rice, decorate it with tinsel on top. Well, now we make the Christmas tree directly: glue the cone with lace, paint it and you can glue different decorations (even the most ordinary buttons will do, the main thing is to paint them first).

You can leave the finished Christmas tree topiary in your decor, or you can give it to one of your friends for good luck.

A cardboard cone can be useful not only as a direct basis for a Christmas tree. You can glue it with cling film and wrap it with threads pre-soaked in glue. Glue different decorations and allow time to dry. When the glue dries, the Christmas tree of threads can be easily removed from the cardboard cone, and all thanks to the film.

Or just wrap the cone with wire, wire with a garland and put on toys. It turns out quite a pretty Christmas tree.

In addition to the garland, you can use some fabric or lace. It will also turn out to be a very beautiful Christmas tree.

And you can stick buttons into the foam base. Glue rhinestones or beads.

Or tightly wrap the base with threads and decorate beautifully with buttons.

Buttons can be used not only to decorate the finished Christmas tree, but also to make a Christmas tree out of them, as shown in the photo.

And finally, speaking of unusual Christmas trees, one cannot but recall wooden Christmas trees. Currently, various design models have been developed that are sold in online stores and conventional ones.

Are we worse than designers? - You can make a wooden Christmas tree with your own hands. To do this, you will need a sheet of fiberboard and tools in order to cut the necessary details from a sheet of fiberboard and preferably a husband who will do everything.

Or here's an option, the principle is the same. This beautiful Christmas tree, like the previous one, is assembled from two parts.

If your husband is friends with similar types of work, you can persuade him to take on a more laborious project: and create this unusual Christmas tree. I hope the photo instructions are very clear.

The finished Christmas tree is attached to the wall, you can decorate it as you like. You can even paint it in some color, I think it will only get better from this.

By the way, if you want such a Christmas tree to last a long time, treat it with protective equipment.

In addition, you can use wooden dies, planks, branches, etc. Cut them into different sizes and glue them together or nail them to the base. Get original table Christmas trees.

And you can “string” the dies on a thin base, you get a beautiful voluminous Christmas tree. By the way, its "branches" can be rotated around its axis.

Or here is such a simple option to make an original Christmas tree with your own hands: just dress up the paddon accordingly.

Or use an old wooden door or window shutters.

And here is another Christmas tree, for the creation of which the sticks left after eating the rolls are suitable.

In addition, you can make an enlarged copy of such a Christmas tree.

Too troublesome, but did you like the tree? - Dress up a ladder, simply and quickly.

And for those who have time for a wagon and a trolley, I want to present the following “masterpieces”.

You can get confused and make a weightless Christmas tree. Surely you will find a round lattice, and a fishing line with hooks is now not a scarce commodity. The main Christmas tree is extraordinary.

No less magical Christmas tree is obtained from a metal mesh, just make a cone out of it, decorate and enjoy the New Year's "magic".

And you can make an unusual Christmas tree out of wire and a large mirror. It is necessary to make semicircles of different sizes, which are attached to a triangular base, painted with paint. Once the paint is dry, decorate the Christmas tree floor with a garland and attach it to a mirror.

We turn on the garland, turn off the light and admire the resulting Christmas tree.

In addition to the mirror, you can use an unnecessary picture and create an unusual Christmas tree panel.

In general, you can make a Christmas tree out of anything: books, balls, corks, light bulbs, etc. Dare! And for inspiration, below are a few more photos of unusual Christmas trees.

By the way, you can make an unusual one out of the most ordinary Christmas tree, for example, turn it into a snowman!

Here are such unusual Christmas trees you can do with your own hands for the new year. Happy new year to you!

In the pre-New Year's fuss, sometimes it’s not up to the Christmas tree: crowds in shops and specialized Christmas markets discourage any desire to acquire a fluffy beauty. However, in order for a real Christmas tree you don't have to buy it. From this article you will learn how to make a Christmas tree with your own hands from improvised materials.

We have collected more than 20 master classes for you with step-by-step photo instructions, so creating a holiday atmosphere in your home is not difficult, even if there is absolutely nothing left. These lessons will also be useful for mothers, because it is a pleasure to work wonders with your kids!

By the way, if you already have a real Christmas tree (artificial or natural), a DIY Christmas tree will be a great themed gift for family and friends! In general, stock up on New Year's mood and go ahead to create!

Let's start with the very simple option- Christmas tree made of paper. To make it, you will need colored paper, scissors, glue, toothpicks and a hole punch.

#2 Christmas tree made of wrapping paper

To make such a Christmas tree, you will need: cardboard or thick paper, wrapping paper of several colors, scissors, glue or double-sided tape.

#3 Origami Christmas tree

To make a Christmas tree you will need: paper, scissors and patience :)

See more paper Christmas trees:

To create you will need: felt, scissors, needle, thread, glue.

You will need: felt, buttons and beads for decoration, a needle, thread, cotton wool, scissors.

Look for more Christmas trees made of felt in the article:

#6 Christmas tree from a plastic bottle

You will need thick paper plastic bottle preferably green, scissors, tape.

#7 Christmas tree from table napkins

You will need: table napkins, a bead, a sewing machine or a needle and thread.

You will need: a plastic bottle or glass, pasta, glue, paint.

Need more pasta ideas?

You will need: thick paper, cones, glue.

We have more ideas for crafts from cones:

You will need: thick paper, coarse thread, glue, beads.

#11 Wire Christmas tree

You will need: thick paper, wire.

#12 Christmas tree from dough

You will need: salt dough (cold porcelain or polymer clay), scissors. From the mass for modeling we form a cone, and then with the help of scissors we “pinch off” the paws. For greater realism, the paws can be bent up a little. Next, we send the Christmas tree to dry. After complete drying, the craft can be further decorated, for example, with paints, sparkles, beads, rhinestones, etc.

You will need: thick paper, colored paper, glue, a lot of patience.

#14 Christmas tree made from cardboard cylinders from toilet paper

You will need: toilet paper rolls, crepe paper, scissors, glue, thread.

Any bushings left? Make more original Christmas crafts!

#15 Christmas tree made of threads

You will need: paper, thick threads, scissors, glue, beads.

#16 Christmas tree from an old magazine

You will need: a magazine, glue, beads or glitter to decorate.

You will need: cotton wool, a dry twig, threads, ribbons, beads and sequins for decoration.

#19 Wine cork Christmas tree

You will need: corks, glue, tape, paint.

#20 Delicious strawberry Christmas tree

You will need: thick paper, strawberries, chocolate.

#21 Wrapping paper Christmas tree

You will need: wrapping paper, glue, whatman paper, decorations.

#22 Christmas tree from balls

#23 Christmas tree from dry branches

You will need: dry branches, rope, lanterns and other decorations.

#24 Cotton pad Christmas tree

If you want to make a Christmas tree from improvised materials, then it's time to pay attention to cotton pads. You will need thick paper for the cone, cotton pads, glue and beads for decoration. By the way, you can decorate the Christmas tree with any materials to your taste: sparkles, sequins, watercolors. Or you can just leave it white. As you like or as time permits.

More crafts for New Year from cotton pads:

#25 Ribbon Christmas tree

A cute Christmas tree can be made from ribbons. To do this, you will need a foam or foam rubber cone, ribbons and a lot of safety pins. The top of such a Christmas tree can be decorated with a golden paper bow.

We have a lot of ideas for New Year's crafts from ribbons.

#26 Christmas tree from a napkin: decorating the New Year's table

You can make a Christmas tree from table cloth napkins. And the Christmas tree, and the decor of the New Year's table. Try it and you won't be able to stop!

Help us become better: if you notice an error, highlight the fragment and click Ctrl+Enter.

In the fall, more and more often you begin to think about the New Year with its festive mood, meetings with friends and family, and, of course, gifts. In addition, the New Year has been associated with the Christmas tree for all of us since childhood! Let's talk about her.)

Fortunately, people are increasingly thinking that it is not worth cutting down a living Christmas tree for the sake of a few public holidays. "Cross" and I fully support this decision and believe that a do-it-yourself Christmas tree is much more interesting and humane! In addition, these are excellent options for those who have nowhere to put a large Christmas tree (for example, there is no free space, or on this free space active young child).

We bring to your attention a large selection of master classes on creating a decorative Christmas tree with your own hands, which will serve as a wonderful decoration for your home and an original gift for a wonderful holiday!

Christmas tree made of cones

A very original Christmas tree with your own hands can be made from pine cones. But we will not use the whole cones, but only their scales, so that the Christmas tree is not too bulky.

So, to begin with, we will separate its scales from the cone. This can be done with a sharp knife, wire cutters or secateurs.

Be careful, take care of your hands!

The next step is to make a cone from thick paper or cardboard, which will be the base of our Christmas tree. We turn the paper into a cone, glue it on the side and cut off the excess at the base.

Then we just take the scales in our hands and glue them in a circle, starting from the base of the cone.

You can glue each new row in a checkerboard pattern, you can, as here, one above the other.

You can glue a clove on the top of the Christmas tree (such a spice))

After the glue dries, you can start painting our beauty. To do this, you can take spray paint or regular acrylic paint.

If you choose acrylic paint with a metallic effect, then your Christmas tree will look much more spectacular.

Then we cover the ends of the "twigs" with PVA glue and sprinkle sparkles on them.

This beauty is obtained as a result of these uncomplicated actions:

Exactly according to the same principle, you can decorate the cone with chains and beads, decorative cords, ribbons, braid, etc.

Another very popular way to make artificial Christmas trees with your own hands is to weave them from beads. This is perhaps the most painstaking way, but for lovers of beading, nothing is impossible!

The detailed process of weaving Christmas trees from beads cannot fit in one article, so we share with you links to master classes previously published on "Cross".

Christmas tree made of paper and cardboard

If you have nothing to do in the workplace) or just want to add a little holiday to the office, make a Christmas tree out of paper. What's easier?)

And this Christmas tree is very similar to the design one, don't you think? It’s all because of the colored designer cardboard, which is so beautiful and bright that you don’t need to decorate the Christmas tree with anything else) which simplifies the process of making a Christmas tree with your own hands.

Secondly, for the manufacture of a designer Christmas tree, you can use threads that are wound on a paper cone using the technology for making openwork balls.

Thirdly, flower netting and bouquet netting.

The manufacturing technology of these three Christmas trees is very similar, so the process of their creation is shown in one master class.

Feather Christmas tree

Yes, they do too! You can buy feathers in hardware stores, or maybe you have stocks of bird feathers? For brightness, they can be dyed with food coloring. It looks original, beautiful and so airy!

In the process of creating a New Year's miracle tree, you can use various materials: coffee beans, tinsel, candies in a bright wrapper, yarn, wrapping paper, buttons, pasta, lemon wedges, fir cones, etc. The basis, as a rule, is a cone made of thick cardboard or foam.

Christmas tree made from coffee beans

We paint the cone-shaped foam base with brown or golden acrylic paint. After the paint has completely dried, you can start decorating the Christmas tree. To do this, we collect silicone into a syringe without a needle, apply it to a small area of \u200b\u200bthe cone and begin to tightly pack the coffee beans, occasionally diluting them with large beads.

We decorate the tree with Christmas beads, and glue a decorative star or a large bead on the top. We make several bows from a thin satin ribbon and attach them to the Christmas tree with pins. If desired, the New Year's crafts can be decorated with artificial foam foam snow by gluing the grains with a colorless varnish. Such a Christmas tree will not only delight the eye with its unusual design, but also fill the house with a noble coffee aroma.

Christmas tree from wrapping paper

A wrapping paper Christmas tree is perhaps one of the easiest and fastest Christmas crafts to make, which will bring a festive mood to the interior. To make such a Christmas tree, we make a cone from a sheet of cardboard or thick paper. We fix the edges of the cone with adhesive tape. At the bottom of the resulting figure, we cut off everything superfluous so that the base is even.

Lay the brown paper face down on a flat surface. We glue one end of the wrapping paper with tape to the top of the cone, after which we begin to slowly wrap it in colored paper. We measure the amount of paper needed to wrap the cone and cut off the rest. Glue thin strips of double-sided tape along the edges of the paper to hold the product together. At the base, we also cut off all unnecessary.

Now it remains only to decorate the resulting Christmas tree with a decorative star, sparkles, rhinestones, stickers, etc. To decorate the interior, it is better to make several such Christmas trees from paper at once. different colors and textures, because in the kit they will look especially original.

Christmas tree from buttons

A button Christmas tree is a beautiful and easy-to-make holiday decoration that you can make with your kids. To create such a decor, you will need a ready-made foam base in the form of a cone, a pin and a large number of buttons of different colors and sizes. We fasten the buttons to the base with pins, placing them close. The color scheme can be any: you can make a classic green Christmas tree with colorful balls or use a combination of several non-standard shades.

Christmas tree made of threads

From ordinary cotton threads, you can make a light, airy and original Christmas tree. The thread color does not have to be green. A tree made of white, golden and even burgundy threads will look no less impressive.

We make a cone from thick paper - it will serve as the frame of the future New Year's beauty. The resulting structure is wrapped with cling film. Pour PVA glue into a deep plate and put a skein of threads into it so that they are properly saturated. Then we begin to wrap the cone with threads from top to bottom, leaving small gaps.

Let the craft dry, then take out the cone and carefully remove the film. We decorate a newly made Christmas tree according to our own taste: it can be snowflakes, sparkles, beads, sequins and other decorative materials. Glue a star or bow to the top. Such a Christmas tree will look especially impressive if a garland is placed inside the structure.

Christmas tree from a bottle of champagne, tinsel and sweets

A bottle of champagne, decorated with sweets and tinsel, will be a wonderful New Year's gift. close person. Such a Christmas tree is made very simply and quickly, so you will have time to arrange a present even on the day of the New Year's party. To do this, wrap a bottle of champagne with tinsel. You need to start from the neck, gradually moving to the base of the bottle. It is better to attach the tinsel to the glass surface using hot glue (glue gun with a silicone rod). The ends of the tinsel at the neck and at the base must be wrapped so that they are not visible.

Next, you need to glue chocolates in a beautiful wrapper to the bottle, which will imitate Christmas tree decorations. The top of the New Year's souvenir can be decorated with a beautiful bow to match the candy wrapper or glued on a soft toy - a symbol of the coming year.

Christmas tree with lemon slices

For fans of eco-style and lovers of citrus aroma, a Christmas tree made of lemon slices will be a wonderful gift for the New Year. Before you start making a Christmas tree, you need to dry the lemon slices. To do this, cut the lemons into thin circles and dry them. naturally or in the oven.

When main element crafts will be ready, we coat the frame for the Christmas tree in the form of a cone with glue and wrap it with a rope to hide the gaps between the citrus slices. Then we begin to peck the base with dried lemon slices, trying to place them as close to each other as possible. We decorate the gaps with other natural materials: cones, nuts or dried berries.

Sisal Christmas tree

Sisal is a material with an unusual texture, so crafts made from it have a very original look. A sisal Christmas tree will look especially impressive in the interior. To make such a tree, it is necessary to paint the paper in the color of the selected sisal. When the paint is dry, roll the paper into a cone and seal the edges with glue. We cut out the base for the cone from thick cardboard. After that, we take the iron wire and thread it through the cone, securing it with tape at the top.

We cover the frame for the future Christmas tree with a dense layer of sisal. The winding should start from the crown: first we wrap the end of the metal wire, after which we smoothly move to the base of the Whatman paper. We glue the ends of each strand of sisal to the cone, cut off everything that remains sticking out to the sides. To give the sisal tree a neat look, lightly crush it with your hands.

The next step is to make a Christmas tree stand. To do this, take a plastic cup and Chinese sticks. We connect the sticks together and wrap them tightly with threads. To keep the tree well inside the pot, place a piece of foam in it. We insert one end of the trunk of wooden sticks into the cardboard base of the Christmas tree, and the other into a cup with foam. Glue cotton wool inside the pot, which will imitate a snow cover. The sisal Christmas tree is ready, it remains only to decorate it with sparkles, stars, beads, bows, flowers and other trinkets.

Christmas tree made of pasta

A Christmas tree made of pasta looks simply gorgeous, you can decorate it with it. New Year's table Or give it as a Christmas present. To create such a Christmas tree, you will need pasta (spirals, tubes or bows), acrylic paints and a cone-shaped base made of cardboard.

Attaching pasta to the base with PVA glue will not work; a glue gun is best for this purpose. Pasta should be glued from the base of the cone, gradually rising at the top. When the craft dries, we paint over each “twig” of pasta with acrylic paint.

If you do not plan to use decorative elements, then it is better to paint the product with golden or silver paint. A green Christmas tree can be decorated with rhinestones, beads or bows. Pasta of a different shape and color will look especially original as a decoration.

Christmas tree made of felt

You can also make a cute Christmas tree from pieces of felt fabric. For crafts, it is better to use several tones of the same color - this will give the tree a more natural and voluminous look. The color of the felt does not have to be green, non-standard shades are only welcome. First you need to make a cone-shaped frame of cardboard or foam. Then, cut out circles of different diameters from scraps of felt fabric. To do this, use pre-prepared templates in the form of cardboard circles.

We decorate the bottom of the cone with tinsel. Make a small hole in the center of each circle. Next, we begin to gradually string mugs of fabric onto a cone, alternating them in size (from largest to smallest). We glue a felt cone on the top of the Christmas tree and decorate the finished tree to our liking.

Christmas tree from Christmas balls

A Christmas tree decorated with balls looks beautiful, elegant and festive. Imagine how bright and impressive a Christmas tree made entirely of Christmas balls will look like. To work, you will need a Styrofoam cone, a glue gun and Christmas balls of different colors. You should start gluing the balls to the base from the bottom, moving in a circle and alternating in a certain order the different colors of the New Year's balls. We decorate the top of the resulting tree with a star or a snowflake. The gaps between the balls can be masked with tinsel, Christmas tree beads, patches of organza or lace fabric.

Christmas tree making steps

Draw a large circle on the cardboard using a compass. Next, cut it out. This will be the basis of the future Christmas tree.

In order to roll a cone from the resulting circle, it should be connected in half, and cut along the fold. Form a cone from the resulting semicircle. Glue the junction of the edge of the cone with its base with glue. Wait a few minutes to allow the glue to hold the cardboard together well and dry.
For the manufacture of quilling strips, green corrugated paper is taken, and cuts 1.5 centimeters wide are applied to it.
On the resulting tapes along the entire length, make frequent cuts, not reaching the edge. This will turn out a fringe of needles for a tree.
To perform the main element of paper rolling, the spiral, one end of the strip is inserted into the forked part of the toothpick and a piece of paper is wound along the entire length onto the toothpick. In this case, it is better to twist the toothpick itself, and not the tape. To get the same elements, try to twist evenly and neatly.
To prevent the twisted paper roll from untwisting, the free end is glued to the base. Let the glue dry.
After all the elements are made, to give them the correct volume, you need to gently fluff the chopped fringe on them.
Glue the prepared paper rolls onto the cone. It is better to start doing this from the top of the cone. To do this, the pointed end is lubricated with glue and an element is put on it.
Press the item. Next, glue the entire cone with fluffy spirals.

The Christmas tree will look brighter if it is decorated with bows and corrugated paper balls. To do this, you can roll multi-colored balls or squares out of it, connected twice, tied in the middle with a thread. Glue the made Christmas decorations.

Such Christmas trees will create a festive atmosphere in the apartment.

To make the tree look beautiful, decorate it with bows

To make a Christmas tree, you can use the instructions

Herringbone in quilling technique

A quilling Christmas tree will become a beautiful and original decoration for a holiday card.

To make a Christmas tree, you will need A4 colored paper, scissors, a toothpick, PVA glue, a Christmas tree base (it can be colored cardboard or a postcard)

To make the Christmas tree look more creative, you can use green colored paper, but in different shades, to make paper spirals. Roll up 4-5 elements of each color.

On colored paper, draw stripes 3-5 millimeters wide, cut.
Next, use a toothpick to start making paper rolls. To do this, insert one edge into the incision made with a knife on a toothpick and twist evenly. Instead of a toothpick, you can use wooden skewers for barbecue or a regular rod. Then you can simply wind in the middle of the selected tool.
In order for the resulting spiral to be free, it is better to let it go. When it blooms a little on the table, fasten it to the selected diameter.
For a more interesting Christmas tree, the bases of the spirals can be twisted in various diameters.
Laying out Christmas trees on cardboard is best to start from the top, taking the smallest element. Glue in the shape of a cone did everything. Maybe in an irregular order.
The Christmas tree can be decorated with ornaments in the form of twisted spirals of a very small diameter or beads.

For the manufacture of spirals, you can use colored paper

A quilling Christmas tree will become a beautiful and original decoration for a holiday card.

Christmas tree from a cardboard cylinder from toilet paper

An unconventional decoration of the New Year's room can be Christmas tree-shaped pendants made from a cardboard sleeve from toilet paper. Such holiday symbols can be hung as separate decorative elements or as a garland.

For decoration you will need:

cardboard, the inside of toilet paper;
emerald or green acrylic paint;
bright ribbon;
flat pieces for decoration. it can be buttons, rhinestones;
glue (for gluing plastic, the “crystal moment” is perfect, its transparent texture will be invisible, plus it dries instantly).
scissors.

When everything you need is prepared, you can start preparing the decoration.

Christmas trees made by yourself will perfectly decorate the apartment

Such Christmas trees can be hung on the ceiling or Christmas tree.

Making a Christmas tree this way is a little easier

First, the roll should be painted with paint in several layers and allowed to dry well. This may take up to half an hour.

In order to make a spiral out of a roll, you need, starting from the top, cut it in a single line to the bottom of a 1.5 cm wide. The ends will be pointed.

To give a tree correct form, twist the cut strip into a coil. To fix the shape, put the resulting spiral under a heavy object, such as a stack of books, for 30-60 minutes.

Unwind the future New Year tree a little, and glue the prepared round elements on the outside, which will imitate balls. You can arrange them both in a chaotic manner, and according to a certain algorithm.

Glue a bright thin ribbon to the top of the craft. It can be a red ribbon to decorate flowers, or even a thick thread, yarn.

Making your own Christmas tree is not difficult.

Japanese paper Christmas tree

For crafts, you can take either special Japanese paper or brightly colored glossy cardboard.

You will also need: wrapping paper (magazine sheets with a bright image), A4 white sheet, skewers, pencil, scissors, ruler, PVA glue.

For the base of the Christmas tree, cut a regular sheet of paper into strips 2 cm wide. Twist all the strips into circles. Attach all the elements to each other in a circle with glue. You should get a large circle of spirals. The width of the circle is arbitrary. The wider, the more stable the figure will be.

Cut out two rectangles of cardboard measuring 21 by 28 cm. Bend each of them with an accordion so that the sides are 1.5 cm wide. Round off the ends of the accordion.

Fold the part in half, gluing it end-to-end. A semicircle is formed

Glue the resulting semicircles with each other so that you get a circle. This will be the bottom row of tree branches. You can replace the glue with wire by piercing both semicircles and twisting its ends.

Make rectangles in two pieces of the following sizes: 18 by 28, 16 by 28, 14 by 26, 12 by 26, 8 by 25, 6 by 23.

Make an accordion from all the rectangles, connect the same semicircles in 6 circles.

Now you need to prepare the skewers. They need to be wrapped. To do this, you will have to cut a strip several centimeters wide from a bright sheet, wrap it in a spiral.

Put on a skewer all the circles of the branches made. There should be wider circles at the bottom.

The herringbone is a very beautiful decorative element.

Herringbone made own efforts perfect addition to the festive atmosphere

To create such a Christmas tree, glossy paper or cardboard is suitable.

Christmas tree in origami technique

A green paper Christmas tree is very easy and quick to make using the origami technique. Mastering the art will be happy not only for children, but also for adults. This technique is attractive in that figures can be made from it anywhere, without additional tools at hand.

You will need green colored paper and scissors.

Instruction

Make a square out of paper.
Connect first in half, running your finger along the bend. Then unfold and bend in half diagonally, on both sides. Expand. You will get a square with highlighted stripes.
Fold along the obtained preliminary bends, as shown in the figure.
Bend each side to the middle.
Expand the resulting bend so that you get a pocket, and connect the edge of the pocket with the center.
Expand the corners of the Christmas tree outside, then roll them inwards.
The Christmas tree will have 8 equal edges, which must be cut along the edges horizontally in 4 places.
Bend the notched sides down diagonally.
Bend the previous bend and tuck it inside the Christmas tree along the resulting line.
The top of the head can be stitched with a thread, making it Christmas tree toy or pendant for interior decoration.

This Christmas tree can be made quickly and easily.

Such a Christmas tree can be made without additional funds

Christmas tree made of paper strips

Many mothers prefer to make gifts for grandparents not only with their own hands, but also begin to instill a craving for creativity in their kids. Young children will be interested in making such a Christmas tree themselves.

For crafts, you will need multi-colored colored paper, scissors, a sheet of cardboard.

Children 3-4 years old will be able to make blanks from strips on their own. For younger children, their mother can pre-cook them.

Cut colored paper into even ribbons of the same width (1-1.5 cm), but of different lengths.
Smear the blanks with glue and glue them on cardboard in the shape of a Christmas tree. From below, horizontally arrange longer segments, gradually shortening their length to the top of the tree.

These trees are very easy to make.

Such a Christmas tree will be a great decoration for a Christmas tree or apartment.

Children can be involved in the creation of the Christmas tree

Volumetric Christmas tree from old paper

To create a New Year's beauty, you can use various improvised means. A product made from sheets of old paper or magazines will look especially interesting.

Such a Christmas tree will look unusual

Herringbone made on their own perfectly decorate the interior

A quick and easy way to make such a piece of Christmas decor

Take 2 magazines, PVA glue.
Fold each sheet into 2 pieces. Bend the protruding edge. Get half a tree.
For the second half, perform the same procedure with the second magazine.
Glue both halves to get the finished Christmas tree. You can make a base by gluing a few wine corks on the bottom.

To make the Christmas tree look more creative, you can sprinkle it around the edges with spray paint.